Lineside detailing parts

Various lineside detail kits, including:
LK21 Wheelbarrow.
LK5 45 gallon oil drums.
LK17 Tool crates.


Various lineside detail kits, including:
LK17 Tool crates & spanners
LK11 Work bench
LK10 Large engineering bench vice
LK12 Hand tool set
LK4 Oil can set
LK5 45 gallon oil drums
LK6 Oil drum taps, and
BP18 Traditional industrial style interior lamp from the buildings range.

With these well-established lineside kits you can detail your railway's store buildings, workshops, etc.

You can assemble the oil drum kit (LK5) in a variety of ways using either the gravity taps or hand pump (LK6). Both types are common sights on many railways. By using one half drum and the drum cradle stand (LK7), you can even make a 'barbecue'!

You can complete the scene by adding an oil can set (LK4) as well as a bench vice (LK10) which, with care, can be assembled in an open or closed position.

(Some pictures not yet available.)

	LK1 4 wheel platform trolley with working brake gear 22 parts
LK4 Oil can set: 1 x feeder, 1 x oil bottle, 1 x oil bottle for wagon axle boxes

	LK5 45 gallon oil drum (4 pieces)
LK6 Oil drum taps: 1 gravity & 1 hand pump

	LK7 Oil drum cradle
LK8 Easy chair, as used in kit LP1

	LK9 Oil drum or paraffin funnel
LK10 Large engineering bench vice (4 parts)

	LK11 Work bench with cupboard on the right-hand side and shelf underneath
LK12 Hand tool set comprising: hammer, saw, file, screwdriver, pliers. Cast in whitemetal

	LK13 Hand drill. Cast in lostwax brass
LK14 Shelf brackets (x 2)

	LK15 Milk churn kit comprising 6 pieces
LK16 Fire bucket & bracket

	LK18 Fence Panel, this kit makes up as a typical railway platform or boundary wrought iron fence. 100mm long with extra long vertical posts for fixing into the ground. All brass parts for maximum strength.
LK19 Gate Panel, this kit makes up as a typical railway platform or boundary wrought iron gate the overall size is determined by you. All brass parts for maximum strength.

	LK20 Fire iron set comprising: firing shovel, coal pick, fire dropping shovel, pricker bar, ashpan rake. All in lost wax brass
LK23 Water tank on wooden trestle stand complete with discharge pipe. The aluminum tank will hold 1.5 litres of water and solve the problem of storing water for your live steam loco.