Leader

The model of "Leader" is based on the previous Accucraft model of "Excelsior", but with a number of improvements, including the larger, standard Accucraft cylinders and a water sight glass.

The loco is fitted with a balloon stack chimney but a standard chimney is supplied loose if you want to change the appearance of your model.

The model is built from stainless steel and brass, and with the correct maintenance, will give a lifetime of pleasure.

Technical specifications

• 0-4-2 saddle tank locomotive.
• Length (over coupling faces): (315mm)
• Length (over buffer beams): 255mm
• Width (over cylinders): 113mm
• Height (over chimney): 157mm
• Weight: 3.2 kg
• Gauge: adjustable between 32 mm and 45 mm. (The loco comes set to 45mm gauge but is supplied with a 32mm gauge pony truck so that you can convert the loco to 32mm gauge if required.)
• Minimum radius: R1 or 2 ft (depending on the couplings on your stock).
• Fitted with a balloon stack chimney but a standard chimney is also supplied.
• Controls fitted as standard: steam regulator/reverser, water level gauge glass, safety valve (set to 60psi), pressure gauge, displacement lubricator, water level check valve and gas regulator.
• Cylinders: bore (12.7mm), piston stroke (19mm).
• Valve gear: Simulated Stephenson link, piston reverse valve controlled by lever in cab. All rods and valve gear are manufactured from stainless steel.
• Boiler: internally gas fired, stainless steel superheater, opening smokebox door.
• Lubrication: Displacement type, fitted with underfloor drain. Filler cap with 'T' bar for easy removal.
• Wheels: insulated as standard with axles running in bronze bearings.
• Colours: S.&K. Green, Maroon, Whipsnade Dark Blue, and Black