Edrig

Edrig is a freelance 0-4-0 side tank locomotive with design inspirations from Hunslet. The loco is internally gas fired with a centre flue boiler and is gauge adjustable from 32mm to 45mm gauge. The cab roof slides back to give access to the gas, water and lubricator fillers. The engine is manually controlled but is suitable for radio control to be fitted.

The model is built from stainless steel and brass, and with the correct maintenance, will give a lifetime of pleasure.

Edrig is also available as either a running chassis, or as a complete power unit so that you can use it as the basis of your own designs.

Technical specifications

• 0-4-0 side tank locomotive.
• Length: (262mm)
• Width: (116mm)
• Height: (155mm)
• Weight: 9lb (4.1kg).
• Gauge: adjustable between 32mm (O Gauge) and 45 mm (Gauge 1).
• Minimum radius: 24" (0.6m).
• Controls fitted as standard: steam regulator/reverser, safety valve (set to 60psi), pressure gauge, displacement lubricator, water level check valve and gas regulator.
• Cylinders: bore (12.7mm), piston stroke (19mm).
• Valve gear: Simulated Stephenson link, piston reverse valve controlled by lever in cab. All rods and valve gear are manufactured from stainless steel.
• Boiler: internally gas fired, stainless steel superheater, opening smokebox door.
• Working pressure: 60psi
• Lubrication: Displacement type, fitted with underfloor drain. Filler cap with 'T' bar for easy removal.
• Wheels: insulated as standard with axles running in bronze bearings.
• Colour: LMS crimson lake or GWR green
• (Optional) Radio control